12 - 5
NETWORK SCANNING (WINDOWS
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
Using the Scan key
Scan to E-mail (PC)
When you select Scan to E-mail (PC) your original will be scanned
and sent directly to the PC you designated on your network. The
Brother SmartUI will activate the default E-mail application on the
designated PC for addressing to the recipient. You can scan a black
and white or color original and it will be sent with the E-mail from the
PC as an attachment.
You can change the Scan configuration. For Windows®
98/98SE/Me/2000: (See Scan to E-mail on page 9-10 to 9-11.) (For
Windows® XP: See Hardware Section: Changing the Scan to button
configuration on page 10-5 to 10-9.)
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press Scan.
3
Press or to select Scan
to E-mail.
Press Set.
4
Press or to select the
destination PC you want to use for
E-mailing your original.
Press Set.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Set.
The DCP will start the scanning process.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a Network scan from the Brother
Control Center (SmartUI).
▲Scan to E-mail
Scan to Image
Scan to OCR
▼Scan to File
Select ▲▼ & Set