Brother DCP-8020, DCP-8025D Using the Brother TWAIN scanner driver with your Macintosh

USING YOUR DCP WITH A MACINTOSH® 11 - 14
Using the Brother TWAIN scanner
driver with your Macintosh®
The Brother DCP software includes a TWAIN Scanner driver for
Macintosh®. You can use this Macintosh® TWAIN Scanner driver
with any applications that support the TWAIN specifications.
Accessing the scanner
Run your Macintosh® TWAIN-compliant application software. The
first time you use the Brother TWAIN driver (MFL Pro/P2500), set it
as the default by choosing Select Source (or the other menu name
to select the device). Afterwards, for each document you scan
choose Acquire Image or Scan. The scanner setup dialog box will
appear.
Mac OS® X Scanning is supported in Mac OS® X 10.2.1 or
greater.
■The screen shown in this section are from Mac OS® 9. The
screen on your Macintosh® may vary depending on your
Operating System.
■The method of selecting the source or choosing to scan may
vary depending on the application software you are using.
(Mac OS® 8.6–9.2)