6 - 13 USING THE DCP AS A PRINTER
5
After the printed envelope comes out of the DCP, the DCP will
wait until you put in the next envelope. Repeat Step 4 for each
envelope you want to print.
6
Send the print data to the DCP.
7
After you finish the print job, close the back output tray.
For DCP-8025D:
2
Open the back output tray, and then unfold the face-up output
tray support if necessary.
3
Open the MP tray and lower it gently.
■Make sure the envelope is straight as you insert it in the
manual feed tray. If it is not, the envelope may not be fed
properly, resulting in a skewed printout or a jam.
■Do not put more than one envelope in the manual feed tray
at any one time, or it may cause a jam.
■Put the envelope in the manual feed tray, making sure that
the side to be printed on is face up in the tray.