Scanner Calibration
h Hold the edges of the Calibration Sheet and insert it with the text face up and the white area feeding first into the scanner, and then click Yes.
9
NOTE
Hold only the edges of the Calibration Sheet and be careful not to touch the white or black area. Leaving marks or fingerprints on this sheet can cause errors in calibration.
i Scanning starts automatically.
j After the Calibration Sheet is scanned, a Calibration was successful message appears on your screen, indicating that calibration is finished. Click OK to end calibration, and then click OK to close the Options screen.
NOTE
If a Calibration failed message appears on your screen, remove the Micro USB Cable from your computer. Reconnect the Micro USB Cable to the computer and perform the calibration again. If calibration fails again, check the scanner’s print head to ensure it is clean.
56