Troubleshooting and Routine Maintenance
93
Checking the ink volume B
You can check the ink that is left in the
cartridge.
aPress Ink Management.
bPress a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
Ink Volume e
BK:-nnnonnn+
cPress Stop/Exit.
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
aPress Menu, 5, 1.
1.Serial No.
bPress OK.
XXXXXXXXX
cPress Stop/Exit.

Packing and shipping

the machine B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty.
CAUTION
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
aOpen the ink cartridge cover.
bPull the lock release lever down and
take out the ink cartridge. (See
Replacing the ink cartridge on page 86.)
cInstall the yellow protective part, lift the
lock release lever and push it until it
clicks, and then close the ink cartridge
cover.