7Color Block Quality and Alignment Check
1After the cleaning cycle is finished, the LCD shows;
Set Paper and
Press Start
2Make sure the paper is loaded in the paper tray.
Press Color Start.
3The machine starts printing the PRINT QUALITY CHECK SHEET (only during initial ink cartridge installation).
Check in Step A
Check in Step B
Step A: Color Block Quality Check
1The LCD shows:
Is Step "A" OK?
1.Yes 2.No
Check the quality of the four color blocks formed by the short lines printed on the sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2If all lines are clear and visible, press on the dial pad to go to STEP B: Alignment
Check.
If you can see missing short lines, press
on the dial pad and go to 3.
OKPoor
3The LCD asks you if the print quality is OK
for each color. Press or on the dial pad.
Black OK?
1.Yes 2.No
When you have finished selecting
(YES) or (NO) for each color, the LCD shows:
Start Cleaning?
1.Yes 2.No
Press (YES), and then machine starts cleaning the colors.
After cleaning is finished, press
Color Start. The machine starts printing the PRINT QUALITY CHECK SHEET again and goes back to the first step of STEP A.
Setting Up the Machine
a Printer or | Send |
the FAX as | for |
Using |
|
Network features of | |
the | the |
Using |
|
9