HOW TO USE YOUR PRESSURE WASHER
IF YOU HAVE ANY PROBLEMS operating your pres-
sure washer, please call the pressure washer helpline at
A | WARNING NEVER adjust spray pattern | |
when spraying. NEVER put hands in front | ||
| ||
| of spray nozzle to adjust spray pattern. | |
| You could be injured. |
HOW TO USE THE ADJUSTABLE NO_LE
On the end of your spray gun is a nozzle that you can slide forward and backward and that you can also twist from side to side. With the adjustable noz- zle you can adjust the spray pattern to be either high pressure or low pressure. You can also adjust the spray so it is concentrated in a stream pattern or expanded into a fan pattern.
•Slide the nozzle forward when you wish to adjust the spray to low pressure mode. Slide the nozzle backward to achieve high pressure.
=if you get spray nozzle too close, especially using high pressure mode, you may damage the clean- ing surface.
HOW TO USE THE TURBO NOZZLE
The rotating turbo nozzte increases the area of the high pressure stream.
IMPORTANT: You cannot apply detergent with this nozzle.
To attach the turbo nozzle:
•Remove the adjustable nozzle from the gun. = Attach the turbo nozzle.
Turbo Nozzle Adjustable Nozzle
3
TIGHTENLOOSEN
APPLYING DETERGENT AND CLEANING WITH ADJUSTABLE NOZZLE
Nozzle _,nHigh | Slide Nozzle Forward | |
Pressure Mode | for low | pressure |
| mode | and detergent |
| application | |
Twisting the nozzte adjusts the spray pattern from a narrow pattern to a fan pattern.
Twist nozzle counter- | Twist | nozzle clock- |
clockwise for fan | wise | for narrow |
spray pattern | spray | pattern |
For most effective cleaning, keep spray nozzle b_tween 8 to 24 inches away from cleaning sur- face.
IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could dam- age the pump.
IMPORTANT: You must attach all hoses before you
start the engine. Starting the engine without all the hoses connected and without the water turned ON
will damage the pump.
To apply detergent follow these steps:
,Prepare the detergent solution as required by the job.
•Hang the detergent solution on the "J" hook on the wire form on the guide handle.
-Place small filter on the clear, chemical injection tube into the detergent container.
•STidethe adjustable nozzle forward to low pres- sure mode. Detergent cannot be applied with noz- zle in high pressure position.
