10 - 1
10
10
Standard telephone and FCC
Notices
These notices are in effect on
models sold and used in the
United States only.
This equipment is hearing-aid compatible.
When programming emergency numbers
or making test calls to emergency
numbers:
■Remain on the line and briefly explain to the
dispatcher the reason for the call before
hanging up.
■Perform these activities in the off-peak hours,
such as early morning or late evening.
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the backside of this equipment is a label that
contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX. If
requested, this number must be provided to the
telephone company.
You may safely connect this equipment to the
telephone line by means of a standard modular
jack, USOC RJ11C.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with
this product. It is designed to be connected to a
compatible modular jack that is also compliant.
See installati on instructio ns for details.
The REN is used to determine the number of
devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in
the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line,
as determined by the total RENs, contact the local
telephone company. For products approved after
July 23, 2001, the REN for this product is part of
the product identifier that has the format
US:AAAEQ##TXXXX.The digits represented by
## are the REN without a decimal point (e.g., 06 is
a REN of 0.6). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But if advance notice isn’t
practical, the telephone company will notify the
customer as soon as possible. Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for
repair or warranty information, please contact
Brother Customer Service. (See Brother numbers
on page i.) If the equipment is causing harm to the
telephone network, the telephone company may
request that you disconnect the equipment until
the problem is resolved.
Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation
commission for information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable your
alarm equipment. If you have questions about
what will disable alarm equipment, call your
telephone company or a qualified installer.
If you are not able to solve a problem with your
machine, call Brother Customer Service. (See
Brother numbers on page i.)
Important information