44 | C H A P T E R S E V E N |
|
|
See
Storing One
Touch Dial
Numbers
p. 43
NAME:
4Use the dial pad to enter the name (up to 15 characters) and press Set . You can use the chart on page 25 to help you enter letters—
Use or to select the type you want and press Set .
FAX a fax only number
TEL a telephone (voice) number
FAX/TEL both a fax and telephone (voice) number
CHAIN a number (usually an access code) for chain dialing.
5 Return to Step 2 to store another
If you must wait for another dial tone at any point in the dialing sequence, store a pause at that point in the number by pressing Redial/Pause . Each key press adds a 3.5 seconds delay.
You can use chain dialing to store long dialing sequences. For example, to store 9 1 201 555 1234 987 65 4321, divide the number into two parts. Store the first part as a Chain type number (this tells the system that the dialing sequence is not complete).
CHAIN—9 1 201 555 1234
The last part of the
FAX or FAX/TEL or TEL—987 65 4321
Now, when you dial, just press the two keys (one after the other, in order) where you’ve stored the two parts of the number.
Access Codes and Credit Card Numbers
Sometimes you may want to choose from among several long distance carriers when you make a call. Rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access codes or