English:
USER’S GUIDE
For errors shown below, the printer indicates an operator call by blinking the Alarm lamp. If you use the printer with the supplied Windows driver, the status monitor will appear to indicate the error on your computer screen. (Both
Error
Cover Open
Print Overrun
Memory Full
(For
This error can occur only when using DOS or Macintosh.
Parallel Interface Line Error
Serial Interface
Framing Error
(For
Serial Interface Parity Error
(For
Serial Interface
Overrun Error
(For
Serial Interface Input Buffer Overflow
(For
Action
Close the top cover of the printer.
∙Press the panel switch to print the data remaining in the printer.
∙If you use the supplied Windows driver, try again after turning on Error Recovery in the PRINT menu of your application software, (Refer to Help section in Windows printer driver for the details.) or expand the printer memory with an optional memory board.
∙If this does not clear the error, reduce the complexity of your document or reduce the print resolution.
∙Press the panel switch to print the data remaining in the printer.
∙Reduce the print resolution or reduce the complexity of your document.
∙Expand the printer memory with an optional memory board.
∙Press the panel switch to resume printing.
∙Check that the connection between your computer and printer is secure and correct, and check the interface cable.
∙Press the panel switch to resume printing.
∙Check the communication parameters such as baud rate and stop bit on both your computer and printer.
∙Press the panel switch to resume printing.
∙Check the communication parameters such as bit length and parity on both your computer and printer.
∙Press the panel switch to resume printing.
∙The interface hardware may be damaged. Consult your dealer.
∙Press the panel switch to resume printing.
∙Check the communication parameters such as the handshake protocols on both your computer and printer.
∙If the error occurs again, the interface hardware may be damaged. Consult your dealer.
