Brother HL-720 manual Bits, DTR only, Off, 9600

English: HL-YL User’s Guide, Chapter 4

CHAPTER 4 OPTIONS

If necessary, set the serial interface parameters as follow:

1.Make sure that the printer is in the off-line state.

2.Set the serial interface parameters by moving up (on) or down (off) the selectors of the dual in-line package (DIP) switch.

ON

1 2 3 4 5 6 7 8

Fig. 4-2 Setting the Serial Interface Parameters

Table 1: Serial Interface Parameters Settings

Selector	Parameters	On (up)			Off (down)
1	Baud Rate	—	See Table 2.	—
2	Baud Rate	—	See Table 2.	—
3	Data Length	7 bits			8 bits
4	Stop Bit	2 bits			1 bit
5	Parity	—	See Table 3.	—
6	Parity	—	See Table 3.	—
7	Protocol	Xon/Xoff + DTR			DTR only
8	Robust Xon	On			Off
Table 2: Baud Rate Settings
Selector 1	Selector 2	For RS-422A			For RS-232C
Off	Off		57600		9600
On	Off		9600		4800
Off	On		1200		1200
On	On		19200		19200

4–3