Control Panel
Print a WLAN report (HL-2270DW only)
You can use Go to print machine's wireless status report. See chapter 5 of the Network User's Guide.
Default settings
The machine has three levels of default settings; the default settings have been set at the factory before | 3 |
shipment. |
|
Network default settings
Factory reset
Settings reset
Note
•You can not modify the preset default settings.
•Page counter can never be changed.
Network default settings (HL-2250DN / HL-2270DW only)
a b
c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and then the Ready LED turns off.
d
e Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The machine will restart.
Factory Reset
You can partially reset the machine back to its default printer settings. The network settings will not be reset:
a b
c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and then the Ready LED turns off.
d
e Press Go eight times. Make sure that all the LEDs light up to indicate the machine has been reset to its factory default settings (except the network settings). The machine will restart.
64