REMOTE FAX OPTIONS 6 - 3
Turning off Remote Fax Options
If you set the Remote Fax Options to Off and there are faxes in your
MFC’s memory, the LCD will gi ve you two options.
■If you press 1, all unprinted faxes will be printed and erased
before the setting turns of f. If a backup copy has already been
printed it will not be printed again.
■If you press 2, the memory will not be erased and the setting will
be unchanged.
(See Printing a fax from the memory on page 4-5.)
■Before you can set up PC Fax Receive you must install the
MFL-Pro Suite software on your PC, make sure your PC is
connected and turned on. (For details, see Using Brother
PC-FAX software on page 5-1 in Software User’s Guide on
the CD-ROM.)
■If you select Backup Print:On, the MFC will also print the
fax at your MFC so you will have a copy if there is a power
failure before it is sent to the PC.
■If you get an error message an d the MFC cannot print the
faxes in memory, you can use this setting to transfer your
faxes to your PC. (For details, see Error messages on page
11-1.)