Installing the Driver & Software
16
STEP 2
Windows®
USB
Windows®
1
1
For USB Interface Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional
x64 Edition)
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 13.
Note
• Please close any applications running before
installing MFL-Pro Suite.
• Make sure there are no memory cards in the
media drive of the machine.
1Disconnect the machine from the power
socket and from your computer, if you already
connected an interface cable.
2Turn on your PC.
(For Windows® 2000 Professional/XP/XP
Professional x64 Edition, you must be logged
on with Administrator rights.)
3Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
4The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
Note
• I f this window does not appear, use Windows®
Explorer to run the setup.exe program from the
root folder of the Brother CD-ROM.
•If you are using Windows® 2000 Professional
and have not installed service pack 3 (SP3) or
greater:
To access the PhotoCapture Center™ features
from your computer you may have to install a
Windows® 2000 update first.
The Windows® 2000 update is included with the
MFL-Pro Suite installer.
To install the update, follow the steps below:
1Click OK to start installation of the Windows®
updates.
2 When instructed, click OK to restart your
computer.
3 After the computer restarts, the installation of
MFL-Pro Suite will automatically continue.
If the installation does not continue automatically,
open the main menu again by ejecting and then
reinserting the CD-ROM disc or double-click the
setup.exe program from the root folder, and
continue from Step 4 to install MFL-Pro Suite.
5After reading and accepting the ScanSoft®
PaperPort® SE License Agreement, click Yes.
6The installation of PaperPort® SE will
automatically start and is followed by the
installation of MFL-Pro Suite.