Brother MFC-5460CN 16 , 17 , 18

Installing the Driver & Software

Windows®

Network

Windows®

16 If the machine is not yet configured for use on

your network, the following screen appears.

Click OK.

The ConfigureIP Address window will

appear. Enter an IP address for your machine

that is suitable for your network by following the

on-screen instructions.

17 When the Brother and ScanSoft On-Line

Registration screen is displayed, make your

selection and follow the on-screen instructions.

18 Click Finish to restart your computer.

(For Windows® 2000 Professional/XP/XP

Professional x64 Edition, you must be logged

on with Administrator rights.)

Note

• After restarting the computer, the Installation

Diagnostics will run automatically. If the

installation is unsuccessful, the installation results

window will be shown. If the Diagnostics shows a

failure, please follow the on-screen instructions or

read the on-line help and FAQ’s in

Start/All Programs (Programs)/Br other/MFC-XXXX

• Once you are sure that you can print after the

installation, restart your Firewall software.

• Firewall setting on your PC may reject the

necessary network connection for Network

Scanning and PC-Fax.

Follow the instructions below to configure your

Windows Firewall. If you are using a personal

Firewall software, see the User's Guide for your

software or contact the software manufacturer.

•For Windows® XP SP2 users:

1Click the Start button, Control Panel and then

Windows Firewall.

Make sure that Windows Firewall on the

General tab is set to On.

2Click the Advanced tab and Settings... button.

3 Click the Add button.

4 To add port 54925 for network scanning, enter

the information below:

1. (Any description)

2. Localhost

3. 54925

4. 54925

5. Select UDP

Then, click OK

5 Click the Add button.

6 To add port 54926 for Network PC-Fax, enter

the information below:

1. (Any description)

2. Localhost

3. 54926

4. 54926

5. Select UDP

Then, click OK

7 Click the Add button.

8 To add port 137 for both network scanning and

Network PC-Fax receiving, enter the

information below:

1. (Any description)

2. Localhost

3. 137

4. 137

5. Select UDP

Then, click OK

9 Make sure if the new setting is added and is

checked, and then click OK.