Setting Up the Machine
9
4Take out the ink cartridge.
5Carefully remove the protective yellow cap(1).
Improper Setup
DO NOT touch the area shown in the
illustration below .
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
6Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the colour of the lock
release lever (1) with the cartridge colour (2),
as shown in the diagram below.
7Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
Note
If the LCD shows Install Black,
Install Yellow, Install Cyan or
Install Magenta after you install the ink
cartridges, check that the ink cartridges are
installed correctly.
The machine will clean the ink tube system for
use for the first time. This process will occ ur
only once, the first time ink cartridges are
installed. The cleaning pr ocess will last
approximately four minutes.
11 1
2
Mbrother
XXXX