Setting Up the Machine
7
Note
When you put the paper into the paper tray, slide
the paper in making sure that it touches the paper
length guide (1) first, then gently lower the other
end of the paper.
6Gently adjust the paper side guides with both
hands to fit the paper.
Make sure the paper side guides touch the
sides of the paper.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause feed
problems.
7Close the tray cover.
8Slowly push the paper tray completely into the
machine.
4 Connecting the phone line
1Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
1
1
2