Brother MFC-8120 Choosing the Handset V olume (For Volume Amplify)

GETTING STARTED 4 - 9
Choosing the Handset V olume
(For Volume Amplify)
Before you begin to us e the MFC, you must de cide if you need to set
the handset volume to Volume Amplify:On for a user who is
hearing-impaired. The AMPLIFY volume level complies with FCC
standards.
Volume Amplify:Off
This default setting is ap propriate if none of the users are
hearing-impaired. During a conversation, users can press Vol ume
or on the control panel to adj ust the volume to Low or High.
When the handset is replaced, the handset volume will remain until
you change it again.
Volume Amplify:On—Tempora ry
This setting is appropriate if some of the users are hearing-impaired.
During a conversation, user s can press Volume or on the
control panel to adjust the volume to Low, High or Amplify. When
the handset is replaced, the handset volume returns to the default
setting of Low.
Volume Amplify:On—Permane nt
Choose Volume Amplify:On—Permanent if all of the users
are hearing-impaired. During a conversation, users can press
Volume or on the control panel to adjust the volume to Low,
High or Amplify. When the handset is replaced, the handset
volume returns to the default setting of Amplify.
WARNING
It is important that you do NOT choose Permanent unless ALL
the users are hearing-impaired. Otherwise, the default setting of
Amplify may damage the hearin g of some users.
When you press Volume or on the control panel to adjust
the volume, the LCD shows th e setting you are choosing. Each
key press changes the volume to the next setting.