DIFFICULTY

SUGGESTIONS

Paper Handling Difficulties
The Brother machineCheck to see if the CHECK PAPER or PAPER
does not load paper. The

JAM message appears on the LCD. If so, the multi-

LCD shows CHECKpurpose sheet feeder may be out of paper or not
PAPER or PAPERproperly installed. If it is empty, load a new stack
JAM.of paper into the feeder. If there is paper in the

 

paper cassette, make sure it is straight. If the paper

 

is curled, you should straighten it. Sometimes it is

 

helpful to remove the paper, turn the stack over and

 

place it back into the paper cassette. Reduce the

 

amount of paper in the paper cassette, and then try

 

again. Check the manual mode is not selected in the

 

printer driver.
How can I load

You can load envelopes from the manual feed slot.

envelopes?Your application software must be set up to print

 

the envelope size you are using. This is usually

 

done in the Page Setup or Document Setup menu of

 

your software. Refer to your application manual.

The machine does not

The Outer Chute on your machine may be bent.
load transparencies.Please straighten the Outer Chute, and then use

 

transparencies again. If the machine still does not

 

load transparencies, call Brother Customer Service

 

to troubleshoot the problem with you.
Paper Handling Difficulties (Cont.)
What paper can I use?

You can use plain paper, envelopes, transparencies

 

and labels for laser machines. For information on

 

paper you can use, See Acceptable Paper, page 2-6.

How can I clear paperSee Paper Jam on page 19-4to 19-5.
jams?

 

 

Scanning Difficulty
TWAIN Errors appear

Make sure the Brother TWAIN Driver is selected as

while scanning.

the primary source. For FAX-5750e in PaperPort®,

 

click File Select Source, highlight the Brother

 

TWAIN Driver and click Select.

T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 19 - 11