UNIX PRINTING 1 - 4
3
Configure the /etc/printcap file on each host computer to
specify the local print queue, the print server name (als o called
remote machine or rm), and the print server ser vice n ame (also
called remote printer, remote queue, or rp), and the spoo l
directory.
An example of a typical printcap file:
laser1|Printer on Floor 1:\
:lp=:\
:rm=BRN_310107:\
:rp=TEXT_P1:\
:sd=/usr/spool/lpd/laser1:
This step applies to the majority of UNIX systems, incl uding
Linux, Sun OS (but not Solaris 2.xx), Silicon Grap hics (lpr/lpd
option required), DEC ULTRIX, DEC OSF/1, and Digital
UNIX. SCO UNIX users should follow these steps, but should
also refer to the SCO UNIX Configuration section. Users of
RS/6000 AIX, HP-UX, Sun Solaris 2.xx, and other systems
that do not use the printcap file should skip to step 4. SCO
user's should also skip to step 4 (SCO uses the print cap file,
but this file is automatically configured via the rlpconf
command).
Make sure this information is added to the end of the pr intcap
file. Also make sure that the last character in the printcap file
is a colon ":".
This will create a queue named laser1 on the host computer
that communicates to a Brother print server with a node
name (rm) of BRN_310107 and a service name (rp) of
TEXT_P1 printing text files to a Brother printer t hrough spool
directory /usr/spool/lpd/laser1. If you are printing
binary graphics files, you would use the service BINA RY_P1
instead of TEXT_P1.