APPENDIX A - 2
HTTP (Recommended)
Use your favorite web browser to connect to the Brothe r print serv er.
This will allow you to configure printer and/or prin t server paramet ers.
WebJetAdmin
Brother's print server range is HP WebJetAdmin compa tible.
TELNET
To connect to the print server using TELNET on UNIX, Windows
NT®4.0, or most other TCP/IP systems, type: TELNET ipaddress
at the command prompt of the system prompt, where ipaddress is
the IP address of the print server. When you are connecte d, push
RETURN or ENTER to get the "#" prompt, enter the password
access (the password will not appear on the screen), and type
anything in response to the Enter Username> prompt. When you
see the Local> prompt, you are ready to enter commands.
Enter HELP at the command prompt for a list of supporte d
commands.
BRCONFIG
The Brother BRCONFIG utility runs from the DOS system prompt
and is installed with BRAdmin. To connect the print serv er u sing the
Brother BRCONFIG NetWare utility, choose the BRCONFIG utility
from the Brother BRAdmin utilities menu. If you have onl y one print
server, you will be immediately connected to t hat ser ver. If you h ave
more than one print server, you will be given a list of available print
servers. Type the number of the print server to which you wish to
connect. When you are connected, enter the password access (the
password will not appear on the screen) at the "#" prompt, and typ e
anything in response to the Enter Username> prompt. When you
get the Local> prompt, you are ready to enter commands. To use
BRCONFIG, a Novell Server (running the IPX protocol) is necessary
and an active connection must be made to the se rver.
Enter HELP at the command prompt for a list of supporte d
commands.