NOVELL NETWARE PRINTING 6 - 2
General Information
In order to use a Brother print server on a NetWare network, one or
more file servers must be configured with a print queue t hat the pri nt
server can service. Users send their print requests to the f ile server's
print queue, and the jobs are then spooled (either direct ly, or in the
case of remote printer mode, via an intermediate print server) to the
appropriate Brother print server.
The system administrator can create Bindery (NetWare 3), NDS
(NetWare 3 and NetWare 4) based queues in a single environmen t
without having to switch between applications by using t he BRAdmin
application.
NetWare 5 users wishing to configure an NDPS printer must use the
NWADMIN application supplied with NetWare 5. Please note that it
is possible to create IPX BINDERY or NDS based queues on a
NetWare 5 system using the BRAdmin application.
You must install the Novell NetWare Client 32 if you wish to create
queue information on your NetWare servers using the BRAdmin
application.
If you can't use the BRAdmin application in your environment , you
can create the queue using the traditional NetWare PCONSOLE
utility or NWADMIN utilities, but you will then als o need to use the
Brother BRCONFIG utility, TELNET or a WWW browser to co nfigure
the print server as described later in this chapter.
Brother print servers can service up to 16 file servers and 32 queues.