Brother Multi-Protocol Print Server

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 8

You will then be asked to enter the port settings for the remote

print server:

Enter any unique legal Internet E-mail address for the remote

print server (for example emailprinter@xyz.com). Note t hat

Internet E-mail addresses cannot have spaces in them.

Enter your E-mail address and the IP address of your SMTP

E-mail server (consult your network administrator if you do not

know this address). Also specify if you are going to use the

Partial E-mail Print option and the Notification type.

Press OK to continue. You will then be asked to re-start your

computer.

Once your computer has re-started you must create a printe r on

your Windows® 95/98/Me/2000/XP and Windows NT®4.0

system using the standard Windows® 95/98/Me/2000/XP and

Windows NT®4.0 printer setup procedure. To do this, go th e

Start button, select Settings and then Printers.

Select Add Printer to begin the printer installation.

Click Next when you get the Add Printer Wizard window.

Select Local Printer when you are asked how the printers are

connected to your computer and push Next.

Select Local Printer when you are asked how the printer is

connected to your computer, and then push Next.

Select the desired model of the remote printer (for example,

Brother HL-series). If necessary, click Have Disk to load the

driver from the CD-ROM. Click Next when you are done.

If you have selected a printer driver that is already being used, you

have the option of either keeping the existing driver (recommended)

or replacing it. Select the desired option and press