Brother MW-145BT manual Charging, Plug the AC adapter cable into the printer

Charging

Use the AC adapter designed specifically for this printer to charge the battery.

After purchasing this printer, be sure to charge the battery fully before using it.

1Plug the AC adapter cable

into the printer.

2 Plug the AC adapter plug into

ahousehold electrical outlet (AC 110 V - 120 V).

Charging of the lithium ion battery automatically begins.

→The orange charging LED is lit.

→When charging is finished, the charging LED

goes off.

yIt takes approximately three hours for the battery to be

recharged from completely empty to fully charged (with the printer turned off).

yRecharge the battery in an environment with a temperature

between 5 °C and 40 °C/41 °F and 104 °F. (The battery will not recharge if the ambient temperature is outside of this range.)

3After charging is finished, disconnect the AC adapter.

The MW-145BT cannot be operated solely with the AC adapter. The rechargeable battery must be installed.

10