CHAPTER 9 LAT NETWORK CONFIGURATION

PATHWORKS for Macintosh Configuration

If you are using PATHWORKS for Macintosh, you will need to make sure that you have a bi-directional channel (in other words, you did NOT enter the command SET SERVICE servicename RECEIVE ENABLED from the remote console). Then create a LAT port using LATCP as shown in the following example (sub-stitute your actual node name and LAT port number):

CREATE PORT LTA53:/APPLICATION

SET PORT LTA53:/NODE=BRN_009C53/PORT=P1

Do not set the LAT port as a spooled device. Now go into ADMIN/MSA and enter the command:

ADD PRINTER name/QUEUE=queuename/DEST=LTA53:

where name is the name of the printer, and queuename is the queue name.

9-9