CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING

Operation

Once the print server is installed and the printer is powered on, the Brother print server AppleTalk service name (default is BRN_xxxxxx_P1_AT, where "xxxxxx" is the last six digits of the Ethernet address (MAC address) should appear in the Chooser. If you have an NC-2000 series print server such as the NC-2100h or NC- 2010h, the default Chooser name will be BRO_xxxxxx_P1_AT

You can find the service name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server.

How to Select the Print Server (AppleTalk/EtherTalk)

1.Open the Chooser from the Apple Menu on the Macintosh, and then click on the LaserWriter icon (if necessary, select the appropriate AppleTalk zone from the Network Control Panel).

Figure 2 Macintosh Chooser

2.Click on the appropriate print server and close the Chooser program. You should now be able to print from the Macintosh.

If you cannot see the print server, first make sure that your cabling is correct and that you have enabled EtherTalk from your Macintosh Network Control Panel. You may also need to force the print server into the correct AppleTalk zone using the BRAdmin application or a web browser.

7-3