TROUBLESHOOTING 13 - 8
NC9100h_FM6.0
Windows® 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) Troubleshooting
If you are having trouble printing on a Windows® 95/98/Me Peer-to-
Peer network, check the following (HP JetAdmin compatible
method):
1
If the Print/Fax server does not show up under JetAdmin on a
Windows® 95/98/Me Peer-to-Peer network, try removing all of
the Windows® 95/98/Me network software from the Network
Control panel and then reinstalling them as follows:
First install the IPX/SPX-Compatible Protocol (or the TCP/IP
protocol if you are using a later version of JetAdmin), the
Client for Microsoft Networks, and the network adapter card
driver.
Install the Latest HP JetAdmin software.
Restart the system, and then add the HP JetAdmin service.
Windows® 95/98/Me/2000/XP and Windows NT®4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting
If you are having trouble printing on a Windows® 95/98/Me/2000/XP
and Windows NT®4.0 (or later) Peer-to-Peer network (NetBIOS),
check the following:
1
Make sure that the Brother NetBIOS Port driver is securely
installed and configured according to the Windows® 95/98/Me/
2000/XP and Windows NT®4.0 Peer-to-Peer (NetBIOS)
chapters. You may find that during the installation of the port
driver, the screen that prompts you for a Port name is not
displayed. This happens on some Windows® 95/98/Me/2000/
XP and Windows NT®4.0 computers. Press the ALT and TAB
keys to make it appear.
2
Make sure that the Print/Fax server is configured to be in the
same workgroup or domain as the rest of your computers. It may
take several minutes for the Print/Fax server to appear in the
network neighborhood.