Brother NV6000D USING STORED CUSTOM STITCHES

USING STORED CUSTOM STITCHES
322
USING STORED CUSTOM STITCHES
Storing Custom Stitches in Your
List
Stitch patterns created using the MY CUSTOM
STITCH™ function can be stored for later use.
Once you finish entering the stitch data, press
. The “Saving” message appears and the
stitch will be stored.
Before storing a stitch, press to sew a test-
run of the stitch.
■If the Memory is Full
If the following message appears after is
pressed, the stitch pattern cannot be stored because
either the machine’s memory is full or the stitch
pattern being stored is larger than the amount of
space available in the memory. To be able to store
the stitch pattern in the machine’s memory, a
previously stored stitch pattern must be deleted.
Memo
• Storing a stitch pattern takes a few seconds.
• For details on retrieving a stored stitch pat-
tern, see page 323.
Note
• Do not turn off the machine while the “Sav-
ing” message is displayed, otherwise the
stitch pattern data being saved may be lost.
Note
• To save custom stitches to USB media or in
the computer, follow the previously
described procedure to store the custom
stitch, and then press to select the
stitch (see the following “Retrieving Stored
Stitches” section). Press to save the
stitch to USB media or in the computer. (For
details, “Saving Stitch Patterns to USB
Media” on page 174 or “Saving Stitch
Patterns in the Computer” on page 175.)