Brother PE 300S Power Supply, Insert the plug into a wall outlet Main power switch

POWER SUPPLY

WARNING

–When leaving the sewing machine unattended or when it is not being used, turn off the main power switch of the machine or remove the plug from the wall outlet.

CAUTION

–Do not use this sewing machine with extension cords or multi-plug adaptors, otherwise a fire or an electric shock may occur.

–Do not remove the plug from the wall outlet with wet hands, otherwise an electric shock may occur.

–When unplugging the power cord, turn off the main power switch of the machine, then grasp the plug and pull to unplug the cord. Pulling on the cord may damage it or cause a fire or an electric shock.

–Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted or bundled. In addition, do not place heavy objects on the cord or subject it to heat, otherwise the cord may be damaged or a fire or an electric shock may occur.

If the power cord or plug are damaged, contact your nearest authorized Brother dealer or service center.

–If the sewing machine is not to be used for a long period of time, unplug the power cord, otherwise a fire may occur.

Contents
Setting Up
Machine Operation	Basic Sewing
Utility Stitches

1

1. Insert the plug into a wall outlet.

1Main power switch

Embroidering

Maintenance

2.Set the main power switch to “ I ”.

3.To turn off the sewing machine, set the main power switch to “ ”.

I

O

Troubleshooting
Messages	Error
Sewing Chart
(Programmed in Machine)	Patterns
(Memory Card)	Patterns

12