Brother 884-T05 Trimming the threads between characters, 4Use and to select a pattern, Then use

————————————————————————————————————————————————————————————————————————————————————

3Use to select where the pattern

is to be separated, and then touch to separate it. For this example, the pattern will be separated between “T” and “a”.

Note

●A separated character pattern cannot be combined again.

4Use and to select a pattern, and

then use to adjust the character

spacing.

5Touch .

Trimming the threads between characters

If the machine is set to trim the threads between the characters, the jumpstitches between the characters are reduced and any other necessary procedures after embroidering are reduced. However, the embroidering time will increase if the threads are trimmed between each of the characters.

1Touch so that it changes to .

5

•Each touch of the key turns the setting either on or off.

Threads are not	Threads are
trimmed.	trimmed.

Editing the Embroidery Pattern (Pattern Editing Screen) 169