Brother 884-T05, PR-650 operation manual Pins

————————————————————————————————————————————————————————————————————————————————————

3Secureframe. the stabilizer with the pins on the cap

1Pins

•Make sure that the pins go through the stabilizer to firmly secure it.

4Lift up (flip) the sweat guard on the inside of the cap, and then place the cap in the cap frame.

Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim.

1Edge of the lower frame

2 Sweat guard

3 Base of the brim

At the same time, align the centerline of the cap with the centerline of the sweat guard holder on the cap frame, and then slide the sweat guard under the sweat guard holder.

5Align the centerline of the cap with the notch in the mounting jig.

1Centerline of cap

2Notch in mounting jig

6Place the sweat guard of the cap inside the notch in the cap frame.

1Notch in cap frame

7Close the clamping frame so that the brim of the cap passes between the inside clamping frame and the outside clamping frame.

7

1Sweat guard holder

2Centerline of sweat guard holder

3 Centerline of cap

1Brim of the cap

2Inside clamping frame

3 Outside clamping frame

Using the Optional Cap Frame 233