NETGEAR FS102 manual RJ-45 Connector, 711EA

RJ-45 Connector

The RJ-45 connector (shown in the illustration with an RJ-45 plug) is used to connect workstations and switches through unshielded twisted pair cable. The RJ-45 connector accepts four-pair Category 3 or Category 5 UTP cable. Only two pairs are used for 10BASE-T wiring.

12345678

		8	1
		711EA
		Uplink Assignment:
RJ-45 Connector	Normal Assignment:	Port 1 or 2 on the Model FS102 Switch
Pin Assignment		Port 4 on the Model FS104 Switch
		Port 8 on the Model FS108 Switch
1	Input Receive Data +	Output Transmit Data +
2	Input Receive Data -	Output Transmit Data -
3	Output Transmit Data +	Input Receive Data +
6	Output Transmit Data -	Input Receive Data -
4, 5, 7, 8	Not used	Not used

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide