EDITING A LABEL

Deleting all text at once

Use the Clear key to delete all text at once.

1Press the Clear key.

The Clear options are displayed.

2Using the or key, select "Text Only" to delete all text while retaining the current format settings, or select "Text&Format" to delete all text and format settings.

• Press the Esc key to return to the text entry screen, without erasing (or clearing) text or format.

•When "Text&Format" is selected, all text are cleared and the P-touch labeling system set to the default settings.

3Press the OK or Enter key.

All text is deleted. All format settings are also deleted if "Text&Format" was selected.

Entering Symbols

In addition to the symbols available on the keyboard, there are various symbols (including

international, extended ASCII characters and the user-defined characters *1) available with the symbol function.

To enter a symbol, use the Symbol function (see below).

Alternatively, press the Shift key and then press a key on the keyboard to enter the symbol printed on the selected key's upper-right corner.

Selectable "Symbols" (excluding the user-defined characters) are listed in the Appendix. (See page 55)

To use the user-defined characters, transfer the bitmap image to the P-touch labeling system using the P-touch Transfer Manager.

*1 A bitmap image of a user-created character that is not pre-installed on the P-touch labeling system.

Entering Symbols Using the Symbol Function

1Press the Symbol key.

A list of symbol categories and symbols in that category is displayed.

The last symbol entered is selected in the displayed list.

2Select a symbol category (Punctuation, Mathematics, etc.) using the or key and then press the OK or Enter key.

4Entering Symbols