Brother PT-E500 52

Message	Cause/Remedy
Insert HS 0.23"	A 0.23" (5.8 mm) Heat Shrink Tube is not installed when Template for
Tube Cassette!	0.23" (5.8 mm) Heat Shrink Tube is selected. Install a 0.23" (5.8 mm)
Insert HS 5.8mm	Heat Shrink Tube.
Tube Cassette!
Text Too Long!	The length of the label to be printed using the text entered is longer
	than the length setting. Edit the text to fit within the set length or
	change the length setting.
Memory Full!	There is not enough internal memory available when you try to save
	a label file. Delete any unnecessary files to make more memory
	available for the new label file.
Check # of Digits	The number of digits entered in the bar code data does not match the
Entered!	number of digits set in the bar code parameters. Enter the correct
	number of digits.
Input A,B,C or D At	The bar code data entered does not have the required start/stop code
Start&End!	(A, B, C, or D required at the beginning and end of the bar code data
	for the CODABAR protocol). Enter the bar code data correctly.
Maximum Of 5 Bar	There are already five bar codes entered in the text data when you try
Codes Per Label!	to enter a new bar code. You can only use up to five bar codes in each
	label. You can enter up to two bar codes when	is selected
	in flag layout.
Text Too Large!	The text size is too large. Select a different size option.
System Error 02!	Please contact Brother customer service.
	Refer to the Quick Setup Guide for the contact information.
Select Other Cut	The tape length set using the tape length setting is shorter than the
Option!	total length of the left and right margins applied for the "Large Margin"
	cutting option. You have to select a different cutting option.
Close Cover!	The rear cover is open. Close the cover when printing.
Installed tape is	Tape that is incompatible with the P-touch labeling system has been
not compatible	installed. Use a compatible tape.
with this machine!
Line Limit! Max	Exceeds max. You can enter up to 297 lines in the whole page and
297 Lines per	blocks.
Label
Block Function is	In this setting, you cannot add or delete blocks.
not Allowed!
Line Limit! Max 3	PUNCH-DOWN BLOCK layout allows to print up to 3 lines / block.
Lines
This Function	PUNCH-DOWN BLOCK layout must use 9mm or wider tape
Requires 0.35" or	cassettes.
Wider Tape!
This Function
Requires 9mm or
Wider Tape!
Sequence Type	Texts cannot be edited when you set Sequence Type in PUNCH-
Must be None	DOWN BLOCK to Horizontal or Backbone.
When Editing!

TROUBLESHOOTING 

Error Messages 51