EDITING A LABEL

Setting Auto Fit Style

When "Size" of the Style key is set to "Auto" and label length is set to a specific length, you can select the way of reducing the text size to fit within the label length.

1Press the Menu key, select "Advanced" using the or key, and then press the OK or Enter key.

2Select "Auto Fit Style" using the or key and then press the OK or Enter key.

3Select the style using the or key.

• When "Text Size" is selected, the total text size is modified to fit within the label.

• When "Text Width" is selected, the text width will be reduced to the size of x1/2 setting. (If further size reduction is required to fit the text into the selected label length, the total text size will be modified after reducing the text width to x1/2 setting.)

4Press the OK or Enter key to apply the settings.

• Press the Esc key to return to the previous step.

• Press the Space key to set the style to the default setting ("Text Size").

Setting Frames

You can select the frame of the label by using the Style key. Selectable "Frames" are listed in the Appendix. (See page 59)

1Press the Style key. The current settings are displayed.

2Select an attribute using the or key until the "Frame" is selected, and then select a frame by using the or key.

3Press the OK or Enter key to apply the settings.

New settings are NOT applied if you do not press the OK or

Enter key.

• Press the Esc key to return to the previous step.

• Press the Space key to set the selected attribute to the default value.

8Setting Frames