Brother ULT2001 operation manual Troubleshooting, Adjusting the Screen

Chapter 9 Troubleshooting

ADJUSTING THE SCREEN

If the screen is difficult to see when you turn on the power, follow the steps below.

1.Press your finger anywhere on the screen. Holding your finger on the screen, turn the main power switch off and back on.

* The “Start/Stop” button does not light up at this time.

2.Go to the Brightness of LCD display. Use the , keys to adjust the screen until you can see it easily.

3.When the adjustment is finished, turn the main power switch off and back on.

CONTENTS

1—

2—

3—

4—

5—

6—

7—

8—

9—

?!

Troubleshooting

9-1

Index