Efficient “Flexible Water Tube” Design
Bryan Indirect Water Heaters incorporate the Bryan bent water tube that provides rapid internal water circulation. The result is maxi- mum heat transfer, and the flexible tubes elimi- nate the chance of thermal shock. All tubes are easily removable and replaceable without welding or rolling.
Bryan
Heat
Exchanger
The heat exchanger is the key to the Bryan Indirect Water Heater. It leads to all the advan- tages listed on this page, making the Bryan Indirect Water Heater a perfect choice in dozens of applications.
The heat exchanger is constructed of heavy copper tubing which transfers heat from the primary water to the water flowing through the exchanger. The heat exchanger is designed for two or four-pass flow with low pressure drop. It can easily handle the entire BTU output (or any desired portion) of the heater.
The Bryan Water-PakTMIndirect Water Heating System is a proven method of providing large volumes of hot water, with intermittent draws, for a variety of applications. Circulation between the tank and heat exchanger maintains the required temperature in the tank. Our years of experience in this field have perfected the Bryan Indirect Water Heater.
Simplicity of Indirect Heating
The indirect heat exchanger method of heating water is extremely simple. The primary water in the heater is main- tained at a constant temperature and recirculated only within the heating vessel. The heat exchanger, placed in the primary water, absorbs heat and transfers it to the water flowing through its copper tubes.
Efficiency in a Compact Unit
The Bryan Water-Pak is a completely packaged system comprised of the Indirect Water Heater, Storage Tank and Circulation Piping, all mounted on a structural steel skid. All components are factory wired and assembled, requiring field hookup only on the cold and hot service water connections, the electrical supply, fuel source, and the vent connection.
The Bryan Water-Pak utilizes the superior "Indirect" feature of the water heater, resulting in a high efficient and scale-free operation. The service water does not come in contact with the high temperature heating surfaces, consequently, there is little possibility of scale and corrosion. Thousands of Bryan Indirect Water Heaters have been installed during the past 40 years, most all of them still rendering efficient service.
The Bryan Water-Pak is engineered to provide a compact packaged unit for large volume water heating requirements. Available in many selections of Heater-Tank combinations, horizontal or vertical. Designed for long life, low maintenance and continued maximum efficiency performance.
Each component of the Bryan Water-Pak is easily replace- able. The entire unit need not be replaced, as is often required by other types of water heater equipment.
Storage tanks and water heaters comply with the recom- mendations of ASHRAE 90-75.
Forced Draft | Atmospheric |
Gas Fired CLM-Series | Gas Fired F-Series |
