Bryan Boilers Flexible Water Tube Boilers BRYAN Special applications, custom, Water-Pak Systems

BRYAN® Special applications, custom

Compliance+®

Low NOx Boilers

Bryan hot water and steam boilers in DR, AB, RV and RW Series are available as “LX” type with NOx level of sub 30 PPM gas and reduced oil NOx as standard. Models to meet stricter emission levels down to 9 PPM are also available. Sizes range from 350 MBH to 21,000 MBH (8 BHP to 500 BHP).

RV Series LX Type Steam Boiler

RV500-S150-FDG-LX (120 Boiler HP)

Indirect Water and Pool Heaters

The Bryan “Indirect” water heater utilizes the “Flexible Water Tube” boiler design along with copper and brass heat exchangers installed to generate hot water for commercial service and industrial hot water applications, as well as swimming pool heating. The indirect feature, heating water with water, effectively minimizes scaling and corrosion that normally is experienced

with the short-lived “direct fired” water heater.

Units are available for “tankless” or instanta- neous applications, as well as for “storage” tank systems such as the Bryan “Water-PakTM.”

Indirect

Swimming Pool Heaters

Atmospheric gas and forced draft (all fuels) and electric. The prestigious “Indirect.” The Bryan lndirect principle provides for a long-lived and trouble-free heater, to give many years of reliable and efficient operation. Fifty years of experience in heating swimming pools. Standard sizes range from 350 MBH through 8,000 MBH.

CLM210-W-GI (137,000 Gallons)

Water-Pak™ Systems

Designed to meet large volume hot water needs with low operating and maintenance costs. Includes indirect water heater, storage tank complete with insulation and PVC jacket, and related pump and circulation equipment, mounted on a common skid. Horizontal sizes from 387 to 3,533 gallons; vertical sizes from 335 to 1,922 gallons. Recovery rates from 559 gal/hr (80° to 140°F rise) to 6,400 gal/hr (40° to 160°F rise) depending on boiler size.

	CLM-120-WT-FDG-844-AV-CM-IN
6	(960 GPH w/844 gallon storage)