Bryant 113A warranty Vapor Line Sizing And Cooling Capacity Loss, Physical Data

PHYSICAL DATA

UNIT SIZE---VOLTAGE, SERIES	018---D	024---D	030---E		036---E		042---C	048---E	060---F
Operating Weight lb (kg)	107	110	111		141		190	186	190
	(48.5)	(49.9)	(50.3)		(64.0)		(86.2)	(84.4)	(86.2)
Shipping Weight lb (kg)	130	134	136		170		218	224	226
	(59.0)	(60.8)	(61.7)		(77.1)		(98.9)	(101.6)	(102.5)
Compressor Type					Scroll
REFRIGERANT				Puron→ (R--- 410A)
Control			TXV (Puron→ Hard Shutoff)
Charge lb (kg)	3.50	3.80	4.1		5.34		5.84	7.00	8.19
	(1.60)	(1.72)	(1.86)		(2.42)		(2.65)	(3.18)	(3.71)
COND FAN			Propeller		Type, Direct	Drive
Air Discharge					Vertical
Air Qty (CFM)	1792	2218	2218		2954		3167	3644	3129
Motor HP	1/12	1/10	1/10		1/4		1/5	1/4	1/4
Motor RPM	1100	1100	1100		1100		1100	1100	800
COND COIL
Face Area (Sq ft)	8.4	8.4	9.80		13.13		17.25	19.40	12.93
Fins per In.	20	25	25		25		25	25	20
Rows	1	1	1		1		1	1	2
Circuits	3	3	3		3		4	5	5
VALVE CONNECT. (In. ID)
Vapor	3/4	3/4	3/4		7/8		7/8	7/8	1--- 1/8
Liquid					3/8
REFRIGERANT TUBES (In. OD)
Rated Vapor*	3/4	3/4	7/8		7/8		1--- 1/8	1--- 1/8	1--- 1/8
Liquid					3/8

*Units are rated with 25 ft (7.6 m) of lineset length. See Vapor Line Sizing and Cooling Capacity Loss table when using other sizes and lengths of lineset. Note: See unit Installation Instruction for proper installation.

113A

VAPOR LINE SIZING AND COOLING CAPACITY LOSS

LONG LINE APPLICATION: An application is considered ”Long line” when the total equivalent tubing length exceeds 80 ft. (24.38

m)or when there is more than 20 ft. (6.09 m) vertical separation between indoor and outdoor units. These applications require additional accessories and system modifications for reliable system operation. The maximum allowable total equivalent length is up to 250 ft. (76.2 m). The maximum vertical separation 200 ft. (60.96

m)when outdoor unit is above indoor unit, and up to 80 ft. (24.38

m)when the outdoor unit is below the indoor unit. Refer to Accessory Usage Guideline below for required accessories. See Longline Application Guideline for required piping and system modifications. Also, refer to the table below for the vapor tube diameters based on the total length to minimize the cooling capacity loss.

						Cooling Capacity Loss (%)
Unit	Maximum	Vapor Line				Total Equivalent Line Length ft. (m)
	Liquid Line		Standard
Nominal		Diameters				Long Line Application Requires Accessories
	Diameters		Application
Size (Btuh)		(In. OD)
	(In. OD)
			26---50	51---80	81---100	101---125	126---150	151---175	176---200	201---225	226---250
			(7.9---15.2)	(15.5---24.4)	(24.7---30.5)	(30.8---38.1)	(38.4---45.7)	(46.0---53.3)	(53.6---61.0)	(61.3---68.6)	(68.9---76.2)
18000	3/8	1/2	1	2	3	5	6	7	8	9	11
1 Stage		5/8	0	1	1	1	2	2	2	3	3
Puron AC		3/4	0	0	0	0	1	1	1	1	1
24000	3/8	5/8	0	1	2	2	3	3	4	5	5
1 Stage		3/4	0	0	1	1	1	1	1	2	2
Puron AC		7/8	0	0	0	0	0	1	1	1	1
30000	3/8	5/8	1	2	3	3	4	5	6	7	8
1 Stage		3/4	0	0	1	1	1	2	2	2	3
Puron AC		7/8	0	0	0	0	1	1	1	1	1
36000	3/8	5/8	1	2	4	5	6	8	9	10	12
1 Stage		3/4	0	1	1	2	2	3	3	4	4
Puron AC		7/8	0	0	0	1	1	1	1	2	2
42000	3/8	3/4	0	1	2	2	3	4	4	5	6
1 Stage		7/8	0	0	1	1	1	2	2	2	3
Puron AC		1 1/8	0	0	0	0	0	0	0	0	0
48000	3/8	3/4	0	1	2	3	4	5	5	6	7
1 Stage		7/8	0	0	1	1	2	2	2	3	3
Puron AC		1 1/8	0	0	0	0	0	0	0	1	1
60000	3/8	3/4	1	2	4	5	6	7	9	10	11
1 Stage		7/8	0	1	2	2	3	4	4	5	5
Puron AC		1 1/8	0	0	0	1	1	1	1	1	1
Applications in this area are long line. Accessories are required as shown recommended on Long Line Application Guidelines
Applications in this area may have height restrictions that limit allowable total equivalent length, when outdoor unit is below indoor unit										See Long Line Applica-
tion Guidelines

3