
313AAV/JAV
GUIDE SPECIFICATIONS
Gas Furnace
313AAV/JAV
GENERAL
System Description
Furnish a _________________ fixed capacity
for use with natural gas or propane (factory authorized conversion kit required for propane); furnish cold air return plenum; furnish external medial cabinet for use with accessory media filter or standard filter.
Quality Assurance
Unit will be designed, tested and constructed to the current ANSI Z 21.47/CSA 2.3 design standard for
Unit will be 3rd party certified by CSA to the current ANSI Z 21.47/CSA 2.3 design standard for
Unit will carry the CSA Blue Star→ and Blue Flame→ labels.
Unit efficiency testing will be performed per the current DOE test procedure as listed in the Federal Register.
Unit will be certified for capacity and efficiency and listed in the latest GAMA Consumer’s Directory of Certified Efficiency Ratings.
Unit will carry the current Federal Trade Commission Energy Guide efficiency label.
Delivery, Storage and Handling
Unit shall be shipped as single package only and is stored and handled per unit manufacturer’s recommendations.
Warranty (for inclusion by specifying engineer)
U.S. and Canada only. Warranty certificate available upon request.
PRODUCTS
Equipment
Components shall include:
Blower Wheel and Blower Motor
Galvanized blower wheel shall be centrifugal type, statically and dynamically balanced. Blower motor of ECM type shall be permanently lubricated with sealed bearings, of _______hp, and
shall be
Filters
Furnace may have
(x)_______in. (mm).An accessory high efficiency Media Filter is available as an option. _______________ Media Filter.
Casing
Casing shall be of .030 in. (.76 mm) thickness minimum,
Inducer Motor
Inducer motor shall be soft mounted to reduce vibration transmission.
Draft Safeguard Switch
Draft Safeguard Switch (blocked vent safeguard) shall be factory installed to reduce the possibility of vent gas infiltration due to a blocked or restricted vent pipe.
Heat Exchangers
Heat exchangers shall be a
Controls
Control shall include a
Operating Characteristics
Heating Capacity shall be ________ Btuh input; ________ Btuh
output capacity.
Fuel Gas Efficiency shall be 80% AFUE.
Air delivery shall be ___________ CFM minimum at 0.50 in. wc
external static pressure.
Dimensions shall be: depth __________ in.; width _________ in;
height_________in. (mm) (casing only). Height shall
be_________in. (mm) with A/C coil and _____________in. (mm)
overall with plenum.
Electrical Requirements
Electrical supply shall be 115 volts, 60 Hz,
or circuit breaker shall be __________Amps.
Special Features
Refer to section of the product data sheet identifying accessories and descriptions for specific features and available enhancements.
8 Bryant Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231 | Printed in U.S.A. | Edition Date: 3/09 | Catalog No. |
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. | Replaces: |
12