| UNIT W/ | UNIT W/ |
|
| WEIGHT (WITH |
|
|
| WEIGHT (WITH |
|
| |||||||||||||||
UNIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
575A | COIL | COIL | Std Unit |
| Corner W | Corner X | Corner Y | Corner Z | Std Unit | Corner W | Corner X | Corner Y |
| Corner Z | ||||||||||||
| Dim. A | Dim. B | Dim. A | Dim. B | Lb | Kg |
| Lb | Kg | Lb | Kg | Lb | Kg | Lb | Kg | Lb | Kg | Lb | Kg | Lb | Kg | Lb | Kg |
| Lb | Kg |
090 | 1 | 1 | 1 | 1 | 540 | 245 |
| 132 | 60 | 100 | 45 | 133 | 60 | 175 | 80 | 608 | 276 | 160 | 73 | 117 | 53 | 142 | 64 |
| 189 | 86 |
[508.0] | [431.8] | [546.0] | [425] |
|
| |||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTES:
1. Dimensions in [ ] are in millimeters.
2. Center of Gravity. See chart for dimensions.
3. Direction of air¯ow.
4.Minimum clearance (local codes or jurisdiction may prevail):
a.Bottom to combustible surfaces, 0 in. (0 mm)
b.Outdoor coil, for proper air¯ow, 36 in. (914 mm) one side, 12 in. (305 mm) the other. The side getting the greater clearance is optional.
c.Overhead, 60 in. (1524 mm) to assure proper
d.Between units, control box side, 42 in. (1067 mm) per National Electrical Code (NEC).
e.Between unit and ungrounded surfaces, control box side, 36 in. (914 mm) per NEC.
f.Between unit and block or concrete walls and other grounded surfaces, control box side, 42 in. (1067 mm) per NEC.
5.With the exception of the clearance for the outdoor coil as stated in note 4b, a removable fence or barricade requires no clearance.
6.Units may be installed on combustible ¯oors made from wood or Class A, B, or C roof covering material.
7.Vertical center of gravity is approximately 40% of total unit height.
ELECTRICAL CONNECTIONS
CONNECTION SIZES
AA | 13¤8 | Dia. [35] Field Power Supply Hole | |||
BB |
| 2 Dia. [51] Power Supply Knockout | |||
CC | 21¤2 | Dia. [64] Power Supply Knockout | |||
DD | 7¤8 | Dia. [22] Field Control Wiring Hole | |||
| SERVICE VALVE CONNECTIONS |
| |||
|
|
|
|
|
|
UNIT |
|
| SUCTION |
| LIQUID |
575A090 |
|
| 11¤8 [28.6] |
| 1¤2 [12.7] |
Fig. 2 Ð Dimensions
Ð2Ð