Programming Your Comfort Schedule
Now that you have completed your own comfort chart you are ready to start programming with the convenient user interface.
The label on the back cover of this owner’s manual is provided to write in the numbers and descriptions of each zone. The label can then be removed from the back cover and affixed to the inside of the user interface door.
During the programming process you will enter the starting time, the desired heating and cooling temperatures for each time period, the day, and the zone. To assist you, pictures of the keypad and LCD display are provided for each step. The button or combination of buttons that are pressed along with the corresponding section of the display that will be affected are highlighted in each picture. This will quickly show you when you have performed the step correctly.
If you followed our quick start procedure, you will need to proceed as follows before moving on to Step 1 of programming your system:
1.If the All Zone function was used to set one temperature for all zones, press the All Zone button to release the All Zone function.
2.Press the Hold button to release the Hold function.
3.If All Zone was not used, you may need to remove the Hold function from each zone. Press the Next Zone button to move to the next zone, then press the Hold button to release the Hold function. Continue through all zones.
You are now ready to begin programming.
Step 1
Press the Program button.
A98155
Step 2
Press the Next Zone button until Zone 1 appears on the LCD display.
A98156
