Display
| 6 |
| 1 |
| 10 | 7 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| : | Am | ProgramOn Setup |
|
2 | Pm | Stop Start | 4 | |
| SuMTuWThFSa | unoccupied 123 |
| |
| AUTO |
| COOL | 1 |
1 |
| Override | 5 | |
| OFFON |
| HEAT | 1 |
9 | Locked |
|
|
|
| Fan |
|
| 4 |
8 |
|
|
| |
|
|
| 3 |
|
Quick Start Set the Clock and Go
:
Pm
M
NOTE: During Setup and Programming:
Pressing the Mode button selects different flashing items (represented in black).
Pressing the Up and Down buttons will modify the flashing selection.
1Mode Indicators
Selects the operation mode of the equipment. COOL — indicates the air conditioning mode. HEAT — indicates the heat mode.
AUTO — indicates the system will automatically changeover between the heat and cool
modes as the temperature varies.
OFF — indicates the entire system is turned off. PROGRAM ON
enabled to run. See below.
2 Clock with Day of the Week |
Indicates the current time and day. This clock is also |
used to program the timer periods. See below. |
The thermostat is preprogrammed from the factory to oper- ate equipment* without the need for further programming. To optimize the installation of this thermostat follow the in- structions in the Advanced Setup section.
*The thermostat is not preprogrammed from the factory to operate heat pump systems. To control these systems, follow the steps in the Advanced Setup section, page 4.
3 | Room Temperature Display |
| Indicates the current room temperature. |
| |
4 | Desired Set Temperature |
| Indicates desired room temperature(s). See page 3. |
| |
5 | Override Indication |
| Indicates the current program is currently being |
| |
| overridden for up to 4 hours. See pages 3 and 5. |
|
|
6 | Occupied or Unoccupied Indication |
| Indicates the program number: Occupied 1, 2, 3, or |
| |
| Unoccupied. See pages 3 and 4. |
|
|
7 | Setup Indication |
| Indicates the thermostat is in the programming |
| |
| mode. See page 4. |
|
|
8 | Fan Operation Indication |
| Fan On Icon — indicates constant continuous fan |
| |
| operation. |
| When Fan On Icon is not lit — indicates the fan will |
| only operate when necessary to heat or to cool. |
| Locked Indication |
9 | |
| Locked appears after the right combination of |
| |
| buttons are pressed, rendering the buttons |
| inoperative. See page 5. |
| Start/Stop Indication |
10 | |
| Start or Stop appears when programming timer |
|
Basic Operation
Select Mode
The HEAT setting indicates the temperature the room has to reach before the unit will turn on to heat the room.
The COOL setting indicates the temperature the room has to reach before the unit will turn on to cool the room.
AUTO will automatically
select heat or cool based on room temperature demand.
Program On will activate the
stored timer operation.
(Occupied and Unoccupied
periods.)
:
Pm
M
HEAT
:
Pm
M
COOL
:
Pm
M
COOL
AUTO
HEAT
:
Pm ProgramOn
Munoccupied
functions. See page 3. |
OFF indicates the system is | : |
|
turned off. | Pm | |
| M |
|
| OFF |
|
|
|
|
Page 2
