BSS Audio 9014 manual Regulatory Information, Important safety information read and follow

Regulatory Information v1.0 MR/JMK 8th September 1999

An example of this equipment has been tested and found to comply with the following European and international Standards for Electromagnetic Compatibility (only when used with a metal

wallbox).
Radiated Emissions (EU):	EN55022	(1995) Associated Equip.
Immunity (EU):	EN50082/1	(1997) RF Immunity, Fast Transients ESD
Radiated Emissions (USA):	FCC part 15 Class A

Important safety information - read and follow

It should not be necessary to remove any protective earth or signal cable shield connections to prevent ground loops. Any such disconnections are outside the recommended practice of BSS Audio, and will render the EMC certificate void.

We have written this guide with the aim of helping installers and sound engineers alike to get the most out of the 9014. We recommend that you read this manual, particularly the section on mechanical installation, before attempting to operate the unit.

We welcome any comments or questions regarding the 9014 or other BSS products, and you may contact us at the address or World Wide Web site given below.

BSS Audio:

Cranbourne House,

Cranbourne Industrial Estate,

Potters Bar,

Hertfordshire,

EN6 3JN.

www.bss.co.uk

Tel: +44 (0)1707 660667 Fax: +44 (0)1707 660755

Mechanical Installation

Dimensions of the unit are shown below.

Three 9014 devices can be mounted side-by-side with a 1U panel, available from BSS Audio as part number Z-999-FPNL.

BSS Audio also offer a universal AC input +24V DC power supply, available as part number Z-999-PSU.

The panel can be used to rack mount one or two 9014 devices if required, and can be fitted with the Z-999-PSU power supply, with the use of a PSU tray; part number Z-999- TRAY.

SoundwebTM

123