C H A P T E R 1

Installing, Connecting, and Testing the Host Adapter

This chapter describes the Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI host adapter and explains how to install it into a host, connect it to SCSI storage devices, test the installation, and boot from a disk drive connected to the host adapter.

Note – If you are unfamiliar with Ultra320 SCSI configuration guidelines, read “Ultra320 SCSI Configuration” on page 13 before performing the procedures in this chapter.

This chapter discusses the following topics:

“Features” on page 2

“Installing the Host Adapter” on page 3

“Connecting the Host Adapter” on page 8

“Testing the Host Adapter” on page 9

“Booting the Host Adapter” on page 11

1

Page 11
Image 11
Sun Microsystems LSI22320-SR manual Installing, Connecting, and Testing the Host Adapter