▼To Install the Host Adapter
1.Open the system.
Refer to your system documentation for information about how to open the system.
2.Attach the wrist strap between your wrist and a metal part of the system chassis.
3.For systems with a
icon.
The wrist strap between you and the chassis provides the ground path necessary to safely remove and install the printed circuit boards and components without damaging them.
4.Remove the filler panel for the desired slot.
Refer to the system documentation for information about removing filler panels.
5.Remove the host adapter from its protective bag.
6.Install the host adapter in the selected
See Step 8 of the section “To Prepare for Hardware Installation” on page 4 for how to choose a slot. Also, refer to the system’s hardware documentation for information about mounting details (mounting holes, standoff locking/unlocking, and screws to secure the card).
Caution – Using excessive force can bend or damage the host adapter edge
!connector. Make sure that the edge connector is properly aligned before pressing the adapter into place. The bracket around the two external connectors should fit into the empty space where the filler panel was removed in Step 4.
7.Remove the wrist strap.
8.Close the system.
The next two sections describe how to connect the host adapter to one or more storage devices and how to test the host adapter.
Chapter 1 Installing, Connecting, and Testing the Host Adapter 7
