A P P E N D I X A
Ultra320 SCSI Configuration
This appendix provides general information about Ultra320 SCSI configuration rules. The following topics are discussed:
■“Target Devices” on page 13
■“Bus Length” on page 14
■“Cabling and Termination” on page 15
■“SCSI Symbols” on page 16
Target Devices
For Ultra320 SCSI performance of up to 320 Mbytes/sec, there can be a maximum of 15 devices connected to each port on the host adapter.
The available target addresses (SCSI IDs) for each port on the host adapter are 0 through F.
Note – The SCSI ID of 7 is reserved for the host adapter.
13
