BT 1050 manual To record your outgoing message, To check your outgoing message

To record your outgoing message

	Press buttons in order shown
OGM	Press and hold down the OGM button.
	Your Freestyle 1050 will beep and r
	flashes on the message counter.
OGM	Keep holding down the OGM button and
	say your message into the microphone.
OGM	When you have finished speaking,
	release the OGM button.
	Your Freestyle 1050 will beep, play
	back your message, then beep to
	confirm the recording. It will then
	return to ‘Answer On’ mode.
	To re-record your outgoing message,
	repeat this procedure.

To check your outgoing message

OGM Press the OGM button.

Your Freestyle 1050 will beep, play back your message, then beep to confirm the recording. It will then return to ‘Answer On’ mode.

“Beep. Your message. Beep”

To delete your outgoing message

You can delete your outgoing message and return to your Freestyle 1050’s pre-recorded outgoing message.

OGM

		Press the OGM button.
		“Your message”
		Your outgoing message is played back
		to you.
D		While the message is playing, press
elet
	e

the DELETE button.

Your Freestyle 1050 will beep and play its pre-recorded outgoing message. “Hello, your call cannot be taken at the moment, so please leave your message after the tone.”

Your own message has now been replaced by the Freestyle 1050’s original pre-recorded message.

To switch the answering machine on/off

Answer	Press the ANSWER ON/OFF button.
on/off	Your Freestyle 1050 will announce
	“Answer off ”.
	Display shows a single dash.
on/off	Press the ANSWER ON/OFF button
Answer
	again. The machine will announce
	“Answer On”.

ANSWERING MACHINE

13