BT
To register your BT
On the handset:-
▲Press the UP or DOWN button until the ▼ display shows BASE.
Press the OK button.
The display will show REGIST.
Press the OK button.
The display will show AUTO.
▼Press the DOWN button until CUSTOM is displayed.
The available bases will be displayed.
▲Use the UP or DOWN button to select the ▼ base you want to register your handset to.
C OK | Press the OK button. |
The display will show CODE?. The display will show ____ ____ .
CODE Enter your 4 digit base system code
| (once only). |
C OK | Press the OK button. |
At the base:-
Press and hold the button on the base until it starts to flash.
On the handset:-
The display will show 2, 3, 4, 5, 6.
▲Use the UP or DOWN button to select the ▼ handset you wish to register.
C OK | Press the OK button. |
| The display will show REGIST. |
Note
The number you save becomes the handset’s name (ie. ‘Handset 1’).
To
▲Press the UP or DOWN button until the ▼ display shows BASE.
C OK | Press the OK button. |
▼Press the DOWN button until the display shows PARAM.
C OK | Press the OK button. |
Press the 3 button twice.
CODE Enter your base system code (0000 if not changed).
All registered handset numbers are displayed.
Enter the number of the handset you wish to
C | OK | Press the C button to exit. |
Note
When planning to use a handset with more than one base, we recommend that you:
•Number each handset (from
•Register your handset(s) at base 2
(and 3 & 4 if used) using the same internal number as at base 1.
When registered to more than one base, the base unit will automatically allocate itself a number.
8
