BT On-Air 2000 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051

A total REN of 4 is allowed per telephone line. (For example: if the BT On-Air Classic is used in conjunction with three extension telephones, each with a REN of 1, then the total REN = 4)

Only use approved power supply item code: 872101. Only use approved batteries supply item code: 872102.

RTTE

This apparatus was designed in compliance with European Council decision Number 98/482/EC relative to pan-European connection in view to its connection on the Public Switched Telephone Network (PSTN). It is in conformity with Standards TBR21, TBR38(*)ETSI 201 121.

(*) Terminals integrating an analogue handset function.

Recall

To activate Recall

This is of use when connected to some switchboards i.e. to transfer calls or for some BT Select Services or those services available via your Network Provider. It is only available when a call is in progress.

Recall

When you need to use recall during a call:-

 

Press the RECALL button.

 

appears on the display.

If problems arise, your supplier should be contacted first.

To switch between tone and pulse dialling

The EC marking attests product conformity with the essential requirements in compliance with Directives 73/23/EC for User Safety, 89/336/EC for Electromagnetic perturbations and 98/13/EC for Telecommunication network access.

The manufacturer declares that the products have been manufactured in conformity with Annex III of RTTE Directive 99/05/EC.

Please note this product does not support earth recall.

Switchboard compatibility

Generally this telephone may be connected to switchboards which support tone signalling and timed break recall. In the event of any difficulties please consult your switchboard service provider.

COK

COK

ABC

2

C OK

C OK

Press the UP or DOWN button until the display shows BASE.

Press the OK button.

Press the UP or DOWN button until the display shows PARAM.

Press the OK button.

The display will show F.

Press the 2 button twice.

Use the UP or DOWN button to select either 1 for tone or 2 for pulse (the default setting is tone).

Press the OK button to confirm.

Press the C button to exit.

Switchboard External Line

Access Code

When you connect your telephone to a switchboard, you can set the switchboard’s external line access code so that when you make an external call using the handset directory, redial list or preparatory dialling the code is automatically dialled before the number.

18

Page 19
Image 19
BT 2000 Classic manual Switchboard compatibility, Switchboard External Line Access Code, To activate Recall